Micro Wire Backshell Connector

Different backshell types are available for Split EMI/RFI/filter or accommodate larger wire bundles or screw locks allowing the connectors to be fully mated before the hardware is fastened, or for wire or cable strain relief, Sunkye MIL-DTL-83513 wire backshell electrical connectors provide perfect performance, which widely used in military area, aerospace, aviation, electricals hip-building, defense system, etc.

MICRO-D EMI BACKSHELL of Wire Backshell Connector

• Micro-D aluminum backshell for EMI termination.

• Supplied with stainless steel hardware.

• Various entry sizes & shapes.

• Available for standard and micro termination.

• Shell size from 9 to 100.

Removable jackscrews according to MIL-DTL-83513/05
For pigtail crimping & solder cup connectors only.
2 sizes of hardware: one version for shell sizes from 9 to 69 ways and another version for the 100-way shell size.
1 kit consists of 2 screws and 2 e-rings.
Hex socket head or slot head.
Material: passivated 300 series stainless steel

Contact arrangements of Micro D Wire Backshell Connector

• Metal shell: 9, 15, 21,25,31,37,51,66,74, 100 contacts

• Plastic shell: 9, 15, 21,25,31,37, 51 contacts
  
  

Introduction of Micro D Wire Backshell Connector

• Series: Micro D Connector

• Terminal Mounting: Crimping connector

Contacts: Twist pin contacts, high density interconnection, Beryllium  copper (BeCu), gold over nickel plating
The thickness of Gold plating: ≥1.27micron
TWIST PIN: Male contact, fitted to plug connector.
Socket: Female contact, fitted to socket connector (also known as socket).
Insulator: 20% GFPPS (20% glass filled polyphenylene sulfide)
Insert: Moulded insulation housing, separating each connection.
Interfacial Seal: Fitted to socket connector only
Shell: Connector metal body plated nickel or cadmium.
Jackscrew: High or low profile, hexagonal socket or slotted head.
Jackpot: Mates with jackscrew.
LCP: Liquid Crystal Polymer.
Potting: Epoxy compound used as an encapsulant.
Cable: AFR250 (PTFE) MIL-DTL-681
Wire length: ≤6 meters (Recommend)

Standard connector: Manufactured to the standard dimensions and specifications.
Special connector: A standard connector modified to meet specific requirements.
Custom-made connector: Designed to meet specific customer requirements.
Pigtail connector: Connector with insulated or uninsulated wires.
Harness: Multi-branched cable assembly.